SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI).
When replacing the original probe with SuperPINDA make sure to use the 3.9.2 or higher firmware version.
SuperPINDA is temperature-independent, with higher quality sensor, and doesn’t need a thermistor. Making the first layer calibration and mesh bed leveling much easier and consistent.
Compatible printer models: MK3/S/+, MK2.5/S, MINI/+
Direct from Prusa themselves.